Freight brokerage TMS · Tracking

How to track loads with MacroPoint, Trucker Tools or project44

Connect your tracking network in Integrations with your own account. Then press Start tracking on a brokered load. Locations, stop arrivals and ETAs come back to the load's check calls until you stop it.

Updated Open this in Tezify
NetworkHow the driver is trackedWhat you need
MacroPointText to the driver or the carrier's ELDAPI username and password, Partner MPID, callback URLs set in MacroPoint
Trucker ToolsThe Trucker Tools driver appLoad Track turned on, Partner ID, Account ID, webhook registered
project44The carrier's ELD or the driver's cellClient ID and secret from project44 Movement
  1. In Integrations, open the card for your network and enter the details from your account.
  2. Open a brokered load. In the tracking network panel, press Start tracking.
  3. Updates land on the load and its check calls. Without webhooks, Tezify refreshes every 30 minutes where the card says so.
  4. Press Stop tracking when you are done.

Each network bills you under your own contract. MacroPoint tracks for the interval and length you contracted, up to 12 hours past the last appointment.

Ready to do it? This lives at /admin/integrations in Tezify.

Open this in Tezify

Still stuck?

Inside Tezify, press the ? at the top of any page to file a ticket with that page attached. Not a customer yet? Ask us anything.