Carrier and trucking TMS · Dispatch

Driver dispatch app: send a load to the driver's phone

Assigning puts a driver on the load. Sending moves it to Dispatched and pushes it to the driver's app. The driver then accepts or declines it, and every status tap after that updates the load in the office.

Updated Open this in Tezify

A driver dispatch app replaces the phone call and the text message full of addresses. In Tezify, the office sends the load from the TMS and the driver gets it in the Tezify Driver app, with the stops in order, the appointments, the reference numbers and the documents you chose to share.

Send a load

  1. Open the load, or use the planner.
  2. Pick the driver. Their truck and trailer fill in from the roster. Change them if needed.
  3. Read any warnings: hours of service, time off, or the same driver on another load.
  4. Press Send to driver. The load becomes Dispatched and the driver gets a notice.
  5. Watch for the driver to accept. A decline comes back with their reason.

What the driver does in the app

  • Reads the load sheet: stops, addresses, appointments and references.
  • Accepts or declines the load.
  • Taps status as the load moves, and the load on your board moves with it.
  • Photographs the BOL at pickup and the POD at delivery.
  • Chats with dispatch about the load.

When Send is refused

  • No truck on the load or the driver's roster.
  • The driver has no app login yet.
  • The CDL, medical card or drug test status blocks them.
  • The truck or trailer is out of service, or its registration or annual inspection has expired.
  • The load is cancelled or delivered.

Changing the driver

Swapping the driver on a Dispatched load that has not started puts it back to Open. Send it again to the new driver. A load already in a paid settlement cannot be moved to another driver.

Assign now, send later

You do not have to send the moment you assign. Many dispatchers fill the whole week on the planner first, then send each load the evening before pickup. Until you send, the load stays Open, the planner card is marked Not sent, and the driver's phone shows nothing.

Common questions

Can the driver see the rate?

Only if you turn on "Driver can see the rate confirmation" for that load. The driver rate con shows the driver's rate, never what the customer pays.

Does the driver need a smartphone?

Yes. Android drivers can install Tezify Driver. Any other phone with a browser, iPhone included, can use the web app at tezify.us/drive.

How do I give a driver a login?

Open the driver's page and use the login card to issue a code and PIN. See driver app login.

The driver declined. What now?

Read the reason on the load, then pick another driver and send again, or fix what the driver raised and re-send.

Ready to do it? This lives at /admin/loads in Tezify.

Open this in Tezify

Still stuck?

Inside Tezify, press the ? at the top of any page to file a ticket with that page attached. Not a customer yet? Ask us anything.