Carrier and trucking TMS · Loads
Detention in trucking: bill detention time in Tezify
When the truck has left the stop, press the bill button on that stop. Tezify works out the billable time from the recorded arrival and departure and your free time, adds the charge to the load and the invoice, and can email the broker.
What detention means
Detention is pay for the time a truck is held at a shipper or receiver past the agreed free time. A common term is two hours free, then a set rate per hour. While the driver waits, the hours of service clock keeps running, so detention is how the carrier gets paid for that lost time. Each rate con sets its own terms, so read them before you book.
Set your terms
Under Settings, in the company defaults, set the free time in minutes and the rate per hour. If you never set them, Tezify uses 2 hours free at $60 an hour. Each load can carry its own terms from the rate con on its stops. A blank field uses your default. A 0 is a real term: no free time, or no detention paid.
Bill it
- Make sure the stop has an arrival and a departure time. The driver app records them, or the office can type them.
- Open the load and go to Route and stops.
- On the departed stop, press Bill ~$ with the amount. The server works out the figure again from the recorded times and the load's terms.
- Confirm. The approved charge goes on the load and the invoice.
The amount is the minutes past free time, divided by 60, times the hourly rate, rounded to the dollar.
Make the claim stick
A lot of billed detention never gets paid, because the broker asks for proof and there is none. The Invoicing page has a panel called Can this detention be defended? It checks each recent claim not yet billed for four things: a recorded arrival, a recorded departure, signed paperwork from the stop, and notice to the broker before the free time ran out. It also says which times came from an ELD or geofence and which were typed by hand.
Rules
- You cannot bill while the truck is still on the dock.
- An old amount sent from a stale screen is refused and the real figure is shown.
- Two people pressing it at once bill it only once.
- The Invoicing page lists delivered loads where the truck waited, so you can add detention before you bill.
Common questions
Does the broker get told?
Yes. When detention is approved, a detention notice can go to the broker by email.
What if the invoice is already factored?
A supplemental -S invoice is raised for the detention, so the factored invoice is not changed.
The rate con says one hour free, not two.
Set the free time on that load's stops. Load terms beat your company default, and the bill button uses them.
This broker pays no detention. What do I enter?
Set the rate to 0 on that load. The wait is still recorded on the stop, but the bill comes to nothing.
Ready to do it? This lives at /admin/loads in Tezify.
Related articles
- Carrier and trucking TMSHow to add lumper, layover and other accessorials
- Carrier and trucking TMSHow to add stops and appointments to a load
- Carrier and trucking TMSTrucking invoice: bill a delivered load the same day
- Carrier and trucking TMSHow to create a load in Tezify
- Carrier and trucking TMSRate confirmation to load: upload a broker rate con
- Carrier and trucking TMSHow to import loads from a CSV or Excel file