Carrier and trucking TMS · Loads

Drayage software: track last free day and per diem

Open the load and fill in the Container card: container number, chassis, steamship line, terminal and the dates. Dispatch, then Containers, lists every live box by the clock running on it, and dispatch is alerted the day before a date.

Updated Open this in Tezify

What drayage is

Drayage is the short truck move of a shipping container, most often between a port or rail ramp and a nearby warehouse. The miles are short, but two clocks run on every box, and both cost money when they are missed.

  • Last free day (LFD): the last day the loaded container can sit at the terminal at no charge. After it, the terminal bills demurrage every day until the box is picked up.
  • Empty return by: the date the steamship line wants its empty back. After it, the line bills per diem every day until the empty is returned.

Track a container

  1. Open the container load and find the Container card.
  2. Enter the container number, chassis, steamship line and terminal. Use the full container number: four letters and seven digits, such as TXGU6067340.
  3. Enter the Last free day and the Return empty by date.
  4. When the driver pulls the box, enter the Picked up date. The LFD clock stops and the empty return clock starts.
  5. When the empty is back, enter Empty returned. The container leaves the live list.

The Containers page

Open Dispatch, then Containers. Four tiles sit at the top: live containers, boxes due today or tomorrow, boxes with demurrage running and boxes with per diem running. The table lists each container with its load, chassis, line and terminal, customer and clock. The clock badge turns amber when the date is a day away and red once it has passed.

Alerts

  • When a last free day or empty return date is tomorrow or today, dispatch gets an in-app alert.
  • Once the date has passed, a critical alert says demurrage or per diem is running and since when.
  • One alert per container per day. Cancelled and TONU loads are skipped.

Common questions

Can I turn these alerts off?

Yes. Each automatic alert can be switched on or off under Automations.

Does Tezify pull the last free day from the terminal?

No. Enter it from the terminal or the customer. If the rate con lists a last free day, the rate con reader adds it to the load's Instructions so you can copy it into the card.

Why is a container missing from the list?

It has no date to watch, or its empty is already returned. A count of those shows under the table.

Can I see who has the box?

Yes. The load column shows the load status and the driver, and the load link opens the full load.

Ready to do it? This lives at /admin/drayage in Tezify.

Open this in Tezify

Still stuck?

Inside Tezify, press the ? at the top of any page to file a ticket with that page attached. Not a customer yet? Ask us anything.