Carrier and trucking TMS · IFTA
IFTA mileage tracking: state miles from your ELD or loads
With Samsara or Motive connected, the IFTA page uses the ELD's measured miles by state. Without one, Tezify estimates miles from each delivered load's origin, stops and destination, and labels them as estimated. Gallons come from your fuel records, each fill counted once.
Why the miles source matters
An IFTA return is only as good as its state miles. An ELD logs each state-line crossing against the odometer, so its miles are measured. A load only knows where it picked up and delivered. Miles in a state the truck drove through without stopping are a guess unless something measured them. Auditors ask for the source, so Tezify always names it.
Where miles come from
| Source | When it is used |
|---|---|
| Samsara | When the API token has the Read IFTA (US) scope and the whole quarter reads cleanly |
| Motive | When connected and the whole quarter reads cleanly |
| Your loads | Otherwise. Each delivered load's miles are spread across the states its stops touch. Shown as estimated apportionment. |
The ELD read is all or nothing. If one page of trips fails, or a trip has a state but no distance, Tezify does not build a return from part of the data. A partial read would under-report your miles, which is worse than an estimate that says it is one.
Samsara can take up to 72 hours to finalise a trip's IFTA miles, so wait a few days after the quarter ends before you rely on the last week. A truck reported by both Samsara and Motive is refused rather than counted twice.
Turn on measured miles
- Connect Samsara or Motive under Connections. See connect your ELD.
- For Samsara, open the API token in your Samsara dashboard and add the Read IFTA (US) scope.
- Wait a few days after the quarter ends so the ELD has finalised its trips.
- Reopen Fuel, then IFTA. The miles line should name the ELD as its source.
Where gallons come from
Gallons come from three places: fuel card statements you import, fills logged in the office, and fills drivers log in the app. The same fill from two places is counted once. Each fill needs a state, since that is where the tax was paid at the pump. Sample data is never used on a real return.
Fix the data notes
- Fuel with no state: open the fill on Purchases and add the state.
- Loads with no state Tezify can recognise: fix the origin, destination or stops on the load.
- Miles the ELD reported with no state: these are left out of the table and named in a note. Check the trips in the ELD's own IFTA report, then ask the ELD provider to fix them.
- Cancelled and TONU loads never add miles.
Common questions
Why does IFTA say estimated?
No ELD with state miles is connected, or its read for the quarter was not complete. Miles then come from your loads.
My fleet MPG looks impossible. Why?
Miles and gallons are out of step, usually because a fuel statement is missing or loads are not all delivered. Tezify flags an MPG outside the normal range for a Class 8 truck rather than taxing on it.
Does PeopleNet send IFTA miles?
No. Only Samsara and Motive feed measured state miles today. PeopleNet fleets use the load estimate.
Ready to do it? This lives at /admin/ifta in Tezify.