Carrier and trucking TMS · Drivers

Driver pay per mile or percentage: set a pay plan

On the driver's edit page, open Pay & E-Check, pick the pay method and enter the value. Every load, report, the P&L and the settlement then price that driver the same way.

Updated Open this in Tezify

The four ways to pay a driver

Pay methodWhat you enterHow a load is priced
Percent of revenueThe percent as a whole number, such as 88 or 28That percent of the load's rate. Fuel surcharge is not included.
Per loaded mileDollars a mile, such as 0.60The load's miles times the rate
Flat per loadDollars, such as 450The same amount on every load
HourlyDollars an hour, such as 248 hours a load unless real hours are entered on the settlement

Percent pay is common for owner-operators who keep most of the load. Per mile is the usual plan for company OTR drivers. Flat and hourly suit local, dedicated and yard work.

Set the plan

  1. Open Drivers, pick the driver and press edit.
  2. Go to Pay & E-Check.
  3. Pick the Pay method.
  4. Type the Pay value. For percent pay, 25 means 25 percent.
  5. Fill Default settlement $/mi if you want a backup per-mile rate for loads with no other rule.
  6. Set E-Check % of trip and E-Check cap ($/cycle) if you give advances.
  7. Write the agreement in Pay plan (notes), such as the percent and what it covers, so the office has it in writing.
  8. Save.

Which rule wins

  • Pay typed on the load itself.
  • The pay method and value on the driver.
  • For owner-operators, the lane's owner rate from your lane book.
  • For company drivers, the lane's driver rate.
  • The per-mile rate on the load or the driver, when the load has miles.
  • A default share, marked guessed: 27% for company drivers, 78% for owner-operators.

The percent is taken from the driver rate shown on the load when you set one. Otherwise it uses the carrier rate, then the line haul.

Common mistakes

  • Typing 0.25 for 25 percent. Tezify reads that as a quarter of one percent.
  • Leaving miles off a per-mile driver's load. Pay then falls to the lane rate or the default share.
  • Leaving the method blank. Tezify infers pay from the driver type and marks it guessed, and the settlement cannot be finalized.

Common questions

Can one driver have a different rate on one load?

Yes. Type the driver pay on that load. It beats the driver's plan for that load only.

Does percent pay include fuel surcharge?

No. The percent is of the load rate or the driver rate shown on the load, not the fuel surcharge or extras. Payable extras such as detention are added as extra pay.

How is an owner-operator told apart from a company driver?

By the contractor type on the driver: owner, O/O or 1099 marks an owner-operator. See company drivers vs owner-operators.

Will changing the plan change past statements?

No. Finalized statements are locked. Open loads and the next settlement use the new plan.

Ready to do it? This lives at /admin/drivers in Tezify.

Open this in Tezify

Still stuck?

Inside Tezify, press the ? at the top of any page to file a ticket with that page attached. Not a customer yet? Ask us anything.