Tezify Driver app · Documents

Upload the signed POD from your phone, step by step

Open the delivered load, go to the After delivery card, tap Signed POD, scan or photograph it, fill the other boxes and tap Submit after delivery. Billing gets it right away.

Updated Open this in Tezify

POD and BOL, in plain words

The bill of lading (BOL) is the paper the shipper gives you at pickup. It lists the freight, the count and where it is going. The proof of delivery (POD) is that same paper, or the receiver's own form, signed and dated at delivery. It proves the freight arrived.

Your carrier cannot bill the customer without the POD. Many brokers and factoring companies will not pay without it. A POD sent from the dock gets your carrier paid days sooner than one handed in at the end of the week.

Send the POD

  1. Open the load you delivered.
  2. Scroll to the After delivery card.
  3. Tap the Signed POD box.
  4. Pick Scan document (cleanest for paper), Take a photo, Photo gallery or Files / folder.
  5. Fill the other required boxes: Seal intact, Doors open, loaded and Empty after unload. The Damage / exception box is only needed if there is damage or a shortage.
  6. Type the seal number and odometer if asked.
  7. Tap Submit after delivery.

The POD lands in the load's documents in the office, and billing can invoice. If your next load or your fuel card was on hold for missing paperwork, the hold comes off.

The seal check

If you wrote a seal number at pickup, the app shows it on the delivery card. Type the seal you see at the receiver. If the two do not match, the app warns you in red to call dispatch before the doors open. The mismatch is saved on the report so the office has it.

PODs with more than one page

After the first page, tap Add page 2 of Signed POD, and keep going. Tap the small x on a page to remove a wrong one. Tap a filled box to retake it.

Photos billing can use

  • Lay the paper flat in good light and fill the frame with the page.
  • Make sure the signature, the date and any notes like short or damaged can be read.
  • Use Scan document. It crops and cleans the page for you.
  • Send every page, including the back if the receiver wrote on it.

Already submitted? The card shows Submitted for this load and a Submit again button if you need to add a better copy.

Common questions

Can I send the POD before I tap Delivered?

Yes. The After delivery card is always there on the load.

Does the web app do this too?

Yes. At tezify.us/drive, open the load in the Loads tab and use the delivery photos the same way.

Where do I send the BOL?

On the Before pickup card, in the Bill of lading box, along with the freight and seal photos.

My upload is stuck. What do I do?

Keep the app open on signal for a minute. If it is still stuck, see the guide on fixing uploads.

Ready to do it? This lives at /drive in Tezify.

Open this in Tezify

Still stuck?

Inside Tezify, press the ? at the top of any page to file a ticket with that page attached. Not a customer yet? Ask us anything.