Integrations · Load boards and rates

DAT load posting: post loads and trucks from Tezify

Set up the DAT card first, ask DAT to turn on posting and give the posting user Connexion and Load Board seats, then enter that user's email on the DAT load posting card.

Updated Open this in Tezify

What DAT load posting does in Tezify

Brokerage side: post a load to DAT from the Brokerage Desk. Tezify updates and refreshes the post, and takes it down by itself when the load is covered, cancelled, TONU'd or delivered.

Carrier side: post free trucks to DAT from the Load board, and refresh or remove them.

A post shows as posted only after DAT accepts it. If DAT rejects a field, you see DAT's own message and nothing is marked posted.

Who needs it

Both carriers and brokers. In a workspace with a separate brokerage company (set on Company profile), each company enters its own DAT load posting keys, and work on a load uses the keys of the company that load belongs to. With one company, there is one set of keys.

What you need from DAT load posting

  • The DAT card set up and Connected. Posting signs in with its service account.
  • Posting turned on for your service account (developersupport@dat.com).
  • A DAT user with a Connexion seat and a Load Board seat. Posts are made as this user.

Connect DAT load posting to Tezify

  1. Set up the DAT card first.
  2. Email developersupport@dat.com and ask for posting to be turned on for your service account.
  3. Ask DAT to give the posting user a Connexion seat and a Load Board seat.
  4. In Tezify, open Integrations and find the DAT load posting card. The link at the top of this page opens it.
  5. Put that user's email into DAT posting user email. Leave Freight API base URL blank.
  6. Tick Active and press Save keys.

Test the connection

Press Test connection. Tezify signs the posting user in. Nothing is posted. Your first real post confirms the seats.

Common errors and fixes

What you seeWhat to do
The post was refused.The posting user has no Connexion or Load Board seat. Ask DAT to assign both.
Sign-in failed.Fix the DAT card first. Posting signs in with the same service account.
DAT rejected a field on the post.Read DAT's message on the post. Equipment, length (1 to 199 ft) and weight (up to 100,000 lb) must be within DAT's limits.

What syncs and how often

  • Posts go out when you post, update or refresh. They come down when the load status changes to covered, cancelled, TONU or delivered.

Limits

  • A public rate is sent only when you tick Show a rate on the post.
  • Each company posts with its own DAT account.

Ready to do it? This lives at /admin/integrations?open=dat-posting in Tezify.

Open this in Tezify

Still stuck?

Inside Tezify, press the ? at the top of any page to file a ticket with that page attached. Not a customer yet? Ask us anything.