Integrations · Getting started

How integrations work in Tezify

Each outside system has a card on the Integrations page. You paste the keys the vendor gives you, save, and press Test connection. A card says Connected only after a real test or request reached the vendor.

Updated Open this in Tezify

Where integrations live

Open Integrations in Tezify. Every connector has its own card with a step-by-step guide that shows until it is connected. Each help article here links straight to its card.

Connect any integration

  1. Read what the card needs from the vendor. Many vendors must turn API access on for you first.
  2. Get the key, token or login from the vendor.
  3. Paste each value into the field with the same name on the card.
  4. Tick Active and press Save keys. Secret values are never shown again, only whether they are set.
  5. Press Test connection and read the result.

The three card statuses

StatusMeaning
ConnectedA real test or request reached the vendor and was accepted. Or the feature needs nothing from you and works as it is.
Needs setupSomething is missing. The note under the status names it. Saved keys that were never tested stay here.
Coming soonThere is no working path yet, usually because the vendor publishes no API. Nothing you type would help, so the card takes no keys.

Access modes

  • Read-only: pulls data into Tezify and never changes anything in the other system. The default for data connectors.
  • Write-only: sends to the other system and pulls nothing in. The default for email, SMS and accounting exports.
  • Full control: both. Tracking networks default to it, because starting tracking writes a shipment.

Carrier and brokerage sides

A workspace can run a carrier company and a separate brokerage company. Each side's Integrations page shows its own connectors and the ones both use. Factoring, QuickBooks, email, SMS, DAT, Truckstop, posting, PC*MILER, EDI, project44 and FMCSA keep separate keys per company, so brokerage invoices never go into the carrier's factoring account. Work on a load uses the keys of the company that load belongs to.

Ready to do it? This lives at /admin/integrations in Tezify.

Open this in Tezify

Still stuck?

Inside Tezify, press the ? at the top of any page to file a ticket with that page attached. Not a customer yet? Ask us anything.