Freight brokerage TMS · Covering loads
Load board posting: post brokered loads to DAT and Truckstop
Press Post on a load in the Desk. With DAT or Truckstop posting connected, Tezify posts it, updates it and takes it down when the load is covered, cancelled, TONU'd or delivered. Without it, copy the fields into the board and mark it posted.
When to post a load
Post when your own carriers have passed. Lane history and a bid request to carriers you trust are cheaper and safer, so try those first. A load board brings in carriers you have not used, which means more calls to vet. Post early enough to get calls, and pull the post the moment the load is covered.
What goes on the post
Tezify builds the post from the load: origin and destination as city and state, pickup and delivery dates, equipment, full or partial, weight, commodity, trip miles, your load reference, your contact and your comments. The contact is your brokerage company name, phone, dispatch email and MC from the company profile.
The rate shows only if you tick Show a rate on the post and type a posted rate. Otherwise the post says Call. Use the comments for tarps, team or hazmat.
Post from the Desk
- On the Desk, press Post on the load.
- Tick DAT One, Truckstop or both.
- Decide whether to show a rate, and add comments.
- Press Post to DAT or Post to Truckstop for a board connected for posting.
- For a board that is not connected, press Copy all fields, open the board, post there, then press Mark DAT as posted or Mark Truckstop as posted.
- To change the post later, open it again. The button reads Update. Refresh posts re-reads what is live.
Why a post can be refused
- A stop with no city and state to post.
- An equipment type the board has no code for. DAT takes van, reefer, flatbed, step deck, power only, hotshot, box truck and conestoga. Truckstop takes van, reefer, flatbed, step deck and power only.
- A pickup date in the past.
- A refusal from the board itself, shown in the board's own words.
Each problem is caught before anything is sent where possible. A load is never marked posted when the board did not take it.
Common mistakes
- Leaving a covered load on the board. Carriers keep calling and your reps lose time.
- Posting a rate you will not pay. Carriers screenshot posts.
- Posting before the stops have a city and state. The board needs both.
Common questions
Do I need DAT or Truckstop to use the Desk?
No. Posting is optional. Without a connection you still get the copy-ready fields and the reminder to take posts down.
Does Tezify post my trucks for the brokerage side?
No. Brokerage posting is for loads. Carriers can post free trucks to DAT from their own load board page.
What happens when I change carriers?
If the load goes back to needing a carrier, post it again from the Desk.
Ready to do it? This lives at /admin/brokerage in Tezify.
Related articles
- Freight brokerage TMSHow to email a bid request to your carriers
- Freight brokerage TMSHow to find carriers who ran a lane before
- Freight brokerage TMSHow to cover a load when a carrier calls
- Freight brokerage TMSHow to check DAT and Greenscreens rates on a quote
- Freight brokerage TMSCarrier vetting by MC or DOT number: what Tezify checks
- Freight brokerage TMSDouble brokering and carrier fraud: red flags Tezify checks