Carrier and trucking TMS · Safety

DOT compliance audit: prepare with the Audit Center

Open Safety, then DOT audit. The Compliance Audit Center gathers what an auditor asks for, by regulation: DQ files, drug and alcohol testing, inspections and repairs, the accident register, corrective actions and hours of service. Fix the red items, then export the full report as a PDF.

Updated Open this in Tezify

What a DOT audit looks at

A new carrier gets a new entrant safety audit within its first 12 months. Later, a compliance review can follow a crash, a complaint or poor CSA scores. Either way the auditor works through the same records: who you let drive, how you test them, how you keep the trucks safe, what happened in crashes, and how you control hours.

Most failed audits come from paperwork that was never filed, not from unsafe trucks. A random pool that was never drawn, or an MVR that is 14 months old, counts against you on the day.

The six numbers at the top

TileWhat it tells you
DQ filesThe share of driver files that are complete
Expired credentialsCDLs and medical cards past their date, and any not on file
Random poolHow many of this period's random selections are done
DVIR coverageThe share of dispatched days with an inspection
Accidents on fileEntries in the accident register
Critical actions openCritical defects and actions not yet closed

A tile that could not be read says Unavailable. It never shows zero or green for data Tezify did not see.

Work through the registers

  1. Open Safety and choose DOT audit.
  2. Open Driver qualification files (49 CFR 391.51). Each driver shows CDL and medical expiry, a file score and what is outstanding.
  3. Open Controlled substances & alcohol testing (49 CFR 382.305 and 382.303). Check the quarter's random selections and every post-accident test.
  4. Open Vehicle inspection, repair & maintenance (49 CFR 396.11, .13 and .17). Look at inspections in the last 90 days, units out of service or in the shop, and lapsed registration or annual inspection.
  5. Open the Accident register (49 CFR 390.15). Each crash shows date, driver, location, injuries, fatalities, hazmat, police report number and whether it is DOT-recordable.
  6. Open Corrective actions and close what you can. Closed items keep their resolution dates.
  7. Open Hours of service & monitoring (49 CFR Part 395) to confirm which ELD holds your logs.
  8. Press Export full report (PDF).

Coaching records

Beside the hours section, a coaching gap panel lists drivers whose confirmed camera events repeated with no coaching written down. To an auditor, a missing note reads as if nothing was done. Log the coaching on the camera event before the visit.

What to have ready

  • The full report PDF: measurements, DQ matrix, accident register, random pool and open actions.
  • Inspection PDFs from the Safety page.
  • Accident evidence packets from the incident register.
  • Driver pay statements and load records, if hours or pay are questioned.

Common questions

Does Tezify say whether I would pass?

No. It shows what is on file and what is missing. What an auditor makes of a record is their call.

How far back does the auditor look?

It depends on the record. Inspection reports are kept for months, DQ files for the length of employment plus three years, and the accident register for three years. Tezify keeps every record you enter.

Can my safety manager use this without seeing money pages?

Yes. The Safety role sees the Safety section, drivers, equipment and the map, and none of the money pages.

Where do I start if the DQ tile is red?

Open the driver files and fill the gaps. See driver qualification files.

Ready to do it? This lives at /admin/dot-audit in Tezify.

Open this in Tezify

Still stuck?

Inside Tezify, press the ? at the top of any page to file a ticket with that page attached. Not a customer yet? Ask us anything.