Carrier and trucking TMS · Safety

DVIR app for fleets: electronic driver inspections

Drivers fill your inspection checklist in the Tezify Driver app with photos and a signature. Tezify scores it on the server, files every defect, and takes the truck out of service when a critical item fails.

Updated Open this in Tezify

What a DVIR is

A driver vehicle inspection report is the written record of a driver checking the truck and trailer. 49 CFR 396.13 says a driver must be satisfied the vehicle is safe before driving it. 49 CFR 396.11 covers the report itself and the repair sign-off that follows a defect.

Since 2014, drivers of property-carrying trucks only have to turn in a post-trip report when they find a defect. Many fleets still ask for a check every day, because a paper trail of clean inspections is the easiest thing to show an auditor. Keep DVIRs for at least three months.

Set it up

  1. Open Safety, then Inspections & defects, and find inspection templates.
  2. Tezify adds two starters: Pre-Trip DVIR and DOT Roadside Readiness. Edit them or build your own.
  3. Mark the items that must pass. Brakes, steering, tires, lights, coupling and emergency equipment are required on the starter.
  4. Tell drivers to open the inspection in the app before each trip.

What happens when a driver submits

  • The driver answers each item, adds photos and signs.
  • Tezify scores the answers on the server. A pass sent from a tampered phone is not trusted.
  • Every failed item lands in Defects and Actions for the shop.
  • A failed critical item opens a work order and parks the unit, so dispatch cannot send it out.
  • A seal number typed on the before-pickup inspection is copied to the load and prints on the BOL.

Check compliance from the office

The Daily inspection compliance table shows each driver's dispatched days over the last 14 days, how many DVIRs they did, a percentage, and a red Missing tag for anyone dispatched today with no inspection yet. Days off never count against a driver. Call the red ones first.

Inspection records cover the last 90 days. Load inspection photos show whether each dispatched load has pickup photos and each delivered load has delivery photos. The office can also log an inspection with the form on the Safety page, for example after a shop check.

Each inspection prints as a branded PDF with the score, every item, defects, photos, and lines for the driver and reviewer to sign.

Common mistakes

  • Closing a defect without a repair note. The audit trail then shows a problem and no fix.
  • Letting a driver skip the inspection on short days. The compliance table counts every dispatched day.
  • Making every item required. Drivers rush through long lists. Keep required items to what stops a truck.

Common questions

Do drivers need a separate DVIR app?

No. The inspection is part of the Tezify Driver app on Android and iPhone. The driver uses the same login code and PIN as for loads.

Can the office log an inspection?

Yes. Use the inspection form on the Safety page. It is filed like a driver's inspection.

What happens to a truck with a failed brake check?

If the item is marked critical, Tezify opens a work order and takes the unit out of service. Close the repair and return the unit to service. A later passing DVIR brings it back only when no critical defect or work order is still open. See out-of-service units.

How does the driver do the inspection?

The driver's side is covered in doing your daily DVIR.

Ready to do it? This lives at /admin/safety in Tezify.

Open this in Tezify

Still stuck?

Inside Tezify, press the ? at the top of any page to file a ticket with that page attached. Not a customer yet? Ask us anything.