Tezify Driver app · Loads and status

Accept or turn down a load dispatch sends you

Open the load and answer the card that asks "Can you take this load?" Tap Accept load, or Can't take it and add a reason.

Updated Open this in Tezify

Dispatch can assign you to a load before they send it. You only see a load in the app once dispatch sends it to you. Then it shows on Home and in the Loads tab.

  1. Open the load from Home or the Loads tab.
  2. Find the card Can you take this load?
  3. Tap Accept load if you can run it. Dispatch sees "Dispatch knows you have it."
  4. Or tap Can't take it. Add a reason if you want, like hours, truck issue or personal.
  5. Tap Send to dispatch.

The card goes away once the load is rolling. You do not have to accept before you tap At Pickup, but dispatch plans better when you answer.

After you answer

  • Accepted: the card says "You accepted this load".
  • Turned down: the card says dispatch has been told. Call them if anything changes.
  • If dispatch cancels the load, it drops off your list on the next refresh and you see a short note.

Common questions

Why don't I see the rate?

Drivers never see the customer rate. The load shows "Your est. pay" when your carrier has your pay set up.

Ready to do it? This lives at /drive in Tezify.

Open this in Tezify

Still stuck?

Inside Tezify, press the ? at the top of any page to file a ticket with that page attached. Not a customer yet? Ask us anything.