Tezify Driver app · For the office
Dispatch a load to the driver app and track the answer
Assign the driver and truck, then press Send to driver on the load. The load sheet goes to their app, the status moves to Dispatched, and the line shows sent, accepted or declined.
Why assign and send are two steps
Dispatchers often plan days ahead. A load may change rate, time or truck before it runs. In Tezify, assigning puts the crew on the load but keeps it hidden from the driver. The load stays Open. Sending is the moment you are ready for the driver to see it.
That split stops drivers from seeing loads that are still moving around, and gives you a clear record of when the load really went out.
Send a load
- Open the load, or find it on the loads board or the dispatch planner.
- Assign the driver and the truck. If the load has no truck, Tezify uses the truck on the driver's roster entry.
- Press Send to driver.
- Read the message. It names the driver and says Tezify is waiting for them to accept.
- Watch the status line next to the button.
What happens on the first send
- The load status moves from Open to Dispatched.
- The driver gets a notice in the app: New load sent to you, with the lane and pickup time.
- The send is written to the audit log with your name.
- If the load came in by EDI 204, a Dispatched 214 goes back to that partner.
The status line
| It says | What it means |
|---|---|
| No driver yet | Nobody is on the load |
| Assigned, not sent | Crew is on the load. The driver cannot see it yet. |
| Sent, waiting for driver | In the driver's app, with the time you sent it |
| Driver accepted | The driver tapped Accept load, with the time |
| Driver declined | The driver turned it down, with their reason. The office is alerted. |
After a change, press Re-send. After a decline, fix the problem or pick another driver, then press Send again. Any new assignment clears the earlier send.
When Send is refused
- No driver on the load, or the name is not linked to a driver login. Pick the driver from the list.
- No truck on the load and none on the driver's roster entry.
- The driver's login is archived, removed or switched off.
- The load is cancelled or already delivered.
- It is a brokerage load. Those go to the outside carrier, not the driver app.
- A compliance block on the driver or truck, such as an expired medical card. It is checked again at send time, because days can pass after assigning. An owner override is logged.
If the driver has no app PIN yet, the load is sent and you are told so. Create their login so they can open it.
Common questions
Can the driver see a load I only assigned?
No. An Open load that is assigned but not sent stays out of the app. If someone moves the status past Open by hand, the driver sees it, because the load is now running.
Do I have to send again after I change the stops?
Press Re-send so the driver gets a fresh notice and accepts the new version.
Why can the driver not see the rate con?
Documents start hidden from drivers. Turn on Show to driver for each file you want them to see.
Ready to do it? This lives at /admin/loads in Tezify.
Related articles
- Tezify Driver appAccept or turn down a load dispatch sends you
- Tezify Driver appChoose which load documents a driver can see
- Tezify Driver appCreate a driver app login and reset a PIN
- Carrier and trucking TMSDriver dispatch app: send a load to the driver's phone
- Tezify Driver appSend your drivers the app download link
- Tezify Driver appSet quiet hours for automated driver texts