Integrations · ELD and telematics

Samsara integration: connect ELD data to Tezify

Create a read-only API token in Samsara (Settings, API Tokens), paste it into the Samsara card in Tezify, save, and press Test connection. Tezify then pulls GPS, hours of service, fuel, faults and IFTA miles every hour.

Updated Open this in Tezify

What Samsara does in Tezify

Samsara is the deepest ELD connection in Tezify. It brings live GPS positions to the Live Map, each driver's hours of service to Compliance, fuel and odometer readings to Fuel and Maintenance, engine fault codes, and harsh-driving and safety events to the driver Scorecard.

If the token has the Read IFTA (US) scope, Tezify also pulls Samsara's measured per-state miles for the IFTA page. Those ELD miles win over any route estimate.

Tezify only reads from Samsara. It never changes anything in your Samsara account, and the token needs no Write scope.

Who needs it

Carriers and trucking companies. The Samsara card shows on the carrier company's Integrations page. In a workspace that also runs a separate brokerage company, the brokerage side does not see it.

What you need from Samsara

  • A Samsara login with the Full Admin or Standard Admin role. A tag-limited admin cannot create API tokens.
  • Each truck's name in Samsara should match its unit number in Tezify, so positions land on the right truck.
  • If your Samsara account is in the EU, its regional API address: https://api.eu.samsara.com.

Connect Samsara to Tezify

  1. Sign in at cloud.samsara.com.
  2. Open Settings, then API Tokens, then Add an API Token.
  3. Name it Tezify and leave tag access on the whole organization.
  4. Give it Read access to Vehicles, Drivers, Vehicle Statistics, ELD Hours of Service (US), Safety Events and Scores, Trailers, Fuel and Energy, and IFTA (US).
  5. Press Save and copy the token right away. Samsara shows it only once.
  6. In Tezify, open Integrations and find the Samsara card. The link at the top of this page opens it.
  7. Paste the token into API token. For an EU account, put https://api.eu.samsara.com in API base (region). Otherwise leave it blank.
  8. Tick Active and press Save keys.

Test the connection

Press Test connection. Tezify asks Samsara for one vehicle. If Samsara answers, the card turns Connected. Then press Test data access: each feed (locations, hours, fuel, IFTA and so on) shows OK or names the scope the token is missing. Finish with Sync now to pull data straight away.

Common errors and fixes

What you seeWhat to do
Samsara returned 401 or 403. Check the token's scope.In Samsara open Settings, API Tokens, edit this token and turn on the Read scope it names. Scopes are set per token.
No vehicle locations returned.The token has no Vehicles read scope, or the trucks have no Samsara gateway. Fix the scope and press Sync now.
IFTA miles are empty.Add the Read IFTA (US) scope to the token. Samsara only has IFTA data for US trips.
Trucks or drivers do not match.Rename the vehicle in Samsara to the Tezify unit number, or use Auto-link drivers on the card.
Could not reach Samsara.Leave API base (region) blank unless your account is in the EU. Then test again.

What syncs and how often

  • Positions, hours of service, fuel and odometer, fault codes, safety events and IFTA miles.
  • Every hour, plus whenever you press Sync now on the card.
  • If a scheduled sync fails, the owner gets an alert in the app and by email, and the card shows the error instead of old good news.
  • The optional Scheduler token lets an outside scheduler refresh just your account. Most carriers leave it blank.

Limits

  • Read-only. Nothing is written back to Samsara.
  • IFTA miles exist only for US trips.
  • Data is as fresh as the last sync, so the Live Map can be up to an hour behind between syncs.

Common questions

Does Tezify replace my Samsara logbook?

No. Samsara stays the official ELD. Tezify reads the hours so dispatch can plan with them.

Can I use Samsara and the Tezify driver app together?

Yes. Trucks with Samsara show ELD positions. Drivers still use the Tezify driver app for loads, documents and messages.

Ready to do it? This lives at /admin/integrations?open=samsara in Tezify.

Open this in Tezify

Still stuck?

Inside Tezify, press the ? at the top of any page to file a ticket with that page attached. Not a customer yet? Ask us anything.